CERAMIC AND TILE ADHESIVE DESCRIPTION: Cement based ,resin fortified ceramic and tile adhesive APPLICATION AREAS: Can be applied on interior places vertically & horizantally and on exterior places as a base which are cement base plaster & alum . NOTIFICATION: Can not be applied to wooden,metal,painted & wet surfaces, Can not be applied to gysyum block,gysyum plaster without prime coat which improve adherance. Can not be applied to the surfaces where elasticity & tensile forces at work at considerable degree & also prefabric and bottom heated flat

APPLICATION:

25 kg of Fixkim Ceramic and tile adhesive is mixed with 6-7 liters of water in a cup untill all nods are eliminated.Rest the mixture 5 min. To obtain homogenity to mix again for 2 min.and applied to the surface with 3-10 mm thickness.To spread the mixture by comb and ceramics & tiles are covered by using rubber mullet.

SURFACE PREPARATION & APPLICATION:
Application surface should be purified from molding oil ,dust ,paint dust etch .. which prevent adherence
Surface cracks & holes should be covered by Fixkim repair mortar and moistured before application.
Prepared mixture should be used in two hours.
Since it is a cement base material, direct contact of hands should be avoided .Gloves should be worn

STORAGE:
Under the dry & humidity free circumference in the originall cover Can be stocked 8 months with a stacking not exceed 10 tiers.
Should be consumed in 7 days after cover is open.

TECHNICAL SPECIFICATION:

CONSUMPTION: