FLEX POOL CERAMIC & TILE ADHESİVE DESCRIPTION: Cement based, resin fortified, polymer additive high performance flex pool ceramic adhesive. SPECIFICATION: Suitable for the places which has temperature deviation. It has high elasticity property and high performance. Can be used interior & exterior places & verticularly & horizontically. SURFACE PREPARATION: Application surface should be purified from moulding oil, dust, paint dust etch. which prevent adherence. Surface cracks & holes should be covered by Fixkim repair mortar, deformed plasters should be eliminated and moistured before application

MORTAR PREPARATION & APLICATION: |
25 kg. of Fixkim Flex Pool Ceramic and tile adhesive is mixed with 6-6, 5 litres of water in a cup until all nods are eliminated. Rest the mixture 5 min. To obtain homogeneity to mix again for 2 min. and applied to the surface with 3-10 mm thickness. To spread the mixture by comb and ceramics & tiles are covered by using rubber mullet. For bigger than 20x20 cm ceramics should be adhered to double sides.

NOTIFICATION:

Can not be added anything (Lime, Cement, Gypsum,pPlaster etch. ) to mortar. Expired mortar can not be used. Since
it is a cement base material, direct contact of hands should be avoided. Gloves should be worn.

STORAGE:
Under the dry & humidity free circumference in the original cover Can be stocked 8 months with a stacking not exceed 10 tiers. Should be consumed in 7 days after cover is open.

TECHNICAL SPECIFICATION: