 |
GRANITE & MARBLE ADHESIVE
DESCRIPTION: Cement based, containing mineral material, polymer additive granite adhesive.
SPECIFICATION:
Can be applied for granite, marble, ceramic etc. materials.
For bigger than 40x40 cm ceramics should be adhered to double sides.
SURFACE PREPARATION:
Application surface should be purified from moulding oil, dust, paint dust etch. which prevent adherence
Surface eliminated and moistured before application and after the spreading of Fixkim Gypsum and concrete prime coat by brush should be applied to the surface of the gypsum plaster and plate and when the material is dried.
|
MORTAR PREPARATION & APPLICATION:
25 kg. of Fixkim Granite and Marble adhesive is mixed with 6-6, 5 litres of water in a cup until all nods are eliminated. Rest the mixture 5 min. To obtain homogeneity to mix again for 2 min. and applied to the surface with 3-10 mm thickness. To spread the mixture by comb and granite and marble are covered by using rubber mullet.
NOTIFICATION:
Can not be added anything (Lime, Cement, Gypsum ,Plaster, etch ) to mortar. Expired mortar can not be used. Expired mortar can not be used.
STORAGE:
Under the dry & humidity free circumference in the original cover Can be stocked 8 months with a stacking not exceed 10 tiers. Should be consumed in 7 days after cover is open.
TECHNICAL SPECIFICATION:
| Density |
: |
1450 ± 100 kg/m³ |
| Wet unit weight |
: |
1650 ± 100 kg. /m³ |
| Bonding Strength dry circumference |
: |
>0, 9 N/m² |
| Bonding Strength wet circumference |
: |
>0, 8 N/m² |
| Bonding Strength hot circumference |
: |
>0, 5 N/m² |
| Bonding Strength cold circumference |
:
|
>0, 6 N/m² |
| Application. Temperature |
:
|
+5Cº/+30Cº |
CONSUMPTION:
Comb size
|
Consumption (kg/m²) |
| 3 mm |
2, 2-3
|
| 4 mm |
3-4 |
| 6mm |
4-5 |
| 8 mm |
5-6 |
|